guard
Manufacturing Quality Products Since 1962
folding gates Partitions Storage Info e-mail

FOLDING GATES
Classic Gates
Portable Gates
Door Gates
PARTITIONING SYSTEMS
¨
Woven Wire
Robot Guarding
CO-LOCATION CAGES
¨
Woven Wire Rooms
LOSS PREVENTION
LPC-Cabinets
LPS-Shelving
LPR-Pallet Rack System
¨
Containers
Bulk Storage Lockers
Pallet Rack Decking
Visibility Lockers
¨
Tank & Cylinder Storage
 
 
 
 

Planning A Woven Wire Partitioning System

Woven Wire Room, photo

Standard components are combined to fit virtually every imaginable space.

Plan the system yourself,
or call us
toll free at
1-800-622-2214
with the enclosure dimensions.

We'll have a plan and a quotation back to you in no time without cost or obligation.

Click Here for a
FREE ESTIMATE

Woven Wire Room, photo

Planning a Woven Wire Fencing Enclosure Couldn't Be Easier

  • Make a sketch of the area to be enclosed. Note all dimensions.
  • When determining partition height, use one of the stock heights: 7', 8', 10' or 12'.
  • Use standard width Panels and Doors. 5' Wide Panels are the most economical.
  • When a partition is to be installed between two walls, consider using an Adjustable Panel rather than ordering one with a special width. Adjustable Panels can be cut and adjusted from 2" to 13" wide.
  • Indicate doors and service window panels desired on the drawing.
  • Use a line post approximately every 15'.
  • Use a 90° corner post or adjustable corner post at all corners.
  • Order a wall clamp kit for each partition where it connects to a wall.
    All other standard installation hardware is included.
  • Full size details available upon request.
For Woven Wire Partitions
Click Here
For Woven Wire Rooms
Click Here
For Woven Wire Doors
Click Here
For Woven Wire Ceilings
Click Here

You can expect more from the Folding Guard Company!